Видео

I built a toaster-curer but ran into a few problems. I got a turntable, but they kept warping and cracking under the heat. I may punch a hole through the bottom and keep the motor outside the oven.

Paid advertisement. Horrible cleaning process is the biggest flaw.

7:49- Um, I’m pretty sure another issue people might run into is maybe getting the books out of the shelves with those fingers blocking them!?! Lol

2:57- Yeah…….. all I’ve ever found from buyers and even some sellers on Facebook is a bunch of scammers!!!

Even after seeing it multiple times I still don’t understand how the “tilting vat works?!? I’m pretty sure if it was “tilting” then you would end up with ripples!?!

It’s kinda cool. But it’s very ridiculous with how tiny it is lol But it’s insane that it actually works!

Reminds me of the Polaroid 3D printer

13:05- Do you actually want the ideas here? I know this video is a bit old now!?!

2:56- Are you doing the opposite of what we are supposed to NOT do when it comes to breathing in the resin smells?!?

1:31- So I don’t know if this is actually just a dumb question or not and you might actually bring it up later on in the video……… with how resin lets off a “toxic odor/chemical”, how safe is this really if you will be planning on cooking with the same thing within days?!?

hi Jessy,i need to know if it's necessary to use an air purifier and the heater because with this printer?

I don’t remember if you said this….. but the O PLA+ one you said worked the best, can I use that PLA on any Filament 3D printer? Or do I need a special one?

The 3D print pen probably could if you didn't just make a bunch of squiggly lines and actually tried and went back and forth and kind of welded it with plastic

7:26- Um, the Thunderdome in Mad Max!?! But I am curious if for the ones that are being sold online for a lot of money and actually printed in 2 or more pieces and then they add a very thin wire mech on the inside for durability and then that glue to hide it, then put together?!?

can i have this in a small apartment. do i need to have a mask on

I know this is probably just me….. but 1 things I would have loved for you to have done is, tried to make (let’s just say) a piece of terrain in 1 piece as big as you could and then had that again a model or miniature from a mini game where if people play that game they could visibly confirm the size!?! Like maybe SW Legion or WH 40K!?! Mainly because both of those printers look huge! But the biggest model you made, I could have made the same thing in 2 pieces off of my printer! And I don’t think mine is even half the size of both of those!!!

Ive been wanting to get into resin printing for a couple years now but could never justify the price especially with canadian currency. But this printer is exactly what Ive been waiting for! It has all the features I want and is super affordable! I already pre-ordered it im super excited to receive it :D

fukcincute

Correction you make money off youtube videos. Edsy is garbage, and forget ebay you never get seen. This was just a commercial for you and fedex.

I'd suggest checking out the local thrift/2nd hand store for a used blender.

Noob question: would this also work for small models if I were to scale them up to life size (like a pokemon for example)? Or would the quality not be as defined? Thanks

what about metal printers ????

Really interested in getting this, but I have a question. I understand the enclosure's overall size can be customized, but what's the length/size of the smallest extension ? By the looks of it, one piece looks like it's about 5" in length, so the case's length in any axis can be increased/decreased in 5" intervals ?

Wow, the baby dino that I modeled for Loot Studios got featured on Uncle Jessy, I'm so happy!!!

Hi @UncleJessy, great video! I work for Loot Studios, right in front of the artist Luis Negão, who designed the little dinosaur his work is AMAZING. My favorite one so far! This is amazing!

Nice and am just modeling a laptopish case for my iPad bc i don have money for a 200$ one :)

I would tilt the miniatures back to reduce or eliminate supports on the front of the model.

There’s nothing on the Mars 5 Ultra that would get me to upgrade from my Mars 4 Ultra…I’m good, carry on. YMMV

About that handle... don't you have a 3D printer you could maybe print a handle with? 😆

how does resin take these engravings?

Hi Jessy, from who is that little baby Dino 🦖?😍

Hey uncle Jesse. If you use a program like uv tools that can modify individual layers, by making the first few layers have a high wait before print time, more of the resin can be pushed out from under the build plate and that allows you to have a much better adhesion with a much lower burn in time. I use black abs like, and the burn in time is 2.5 seconds, there is no elephant foot and things are sticking so good

Are the release dates different for other countries? We still can’t get the Saturn 4 ultra here in Australia….

jesus christ, stop with the uptalk, its so annoying

Amazing how you're entire review had nothing negative to say on the machine where as other reviews had some negative issues. Clearly some money has exchanged hands here.

I hate when that happwns

why so expansive? Bambu costs much less. I had my A1 Mini for 140€ with regular discount and A1 heat bed problem discount. I like prusa, but tooo much money

Great machines,dc on the back logical, wifi on the back logical, BUT WHY ALWAYS THE USB PORT ON THE BACK OR SIDE JUST PUT IT AT THE FRONT !!!! (Yes is know it's on the board there, but damn! how hard is it to design it to have the power switch and usb in the front!!!

I've had no issues with my new x1 carbon. The machine is simply amazing. Not one bad part since I've had it and some of the smoothest prints i've ever had...

Did they get their quality control right this time? I love the mars 3 but it died on me. just as 3 cure and wash stations. i was always sent a new one... This is looking incredibly interesting to me..

What sort of ventilation do you recommend for something like this?

Omg I want a new saturn

I had this weird problem on my Anycubic photon mono 2, the base few layers, the float, burn in just fine, but then the supports don't burn in. And, not all of them, only in a certain area which seems to be random for every print. I'm guessing it's the leveling problem but i leveled my plate just last night and i still had the same problem.

Use the broken ones as fruit bowls

FLSun in the corner 😵‍💫

Great review, like the fast slow comparison, I didn’t do that in mine!

here little bro you can copy my homework. lol...... But this is still cool That the Mars line got some love. One day i will get a Saturn Ultra. I do have a OG Mars and Saturn S. So far it all works for me. But some speed would be nice.

What are the fume outputs like on this? I live in a flat with not much room to place something like this so I need to know what it's like to handle the fumes.

Jessy, the only issue I personally have with your content is, you are all about pushing speed, speed, speed. Bigger nozzles, larger layers. That might be good and fine for I dont know how many. For me, I stay with 0.03 layers and .04 nozzles. I got into 3D printing for the details and quality. Not just pumping out items. For you, ok, I can understand it is about getting content and videos made. But to forcefeed it speed, speed, speed and bigger nozzles onto everyone... I just dont agree. Again, personal opinion. I do find quality information about machines in your videos, but you lose me when you get kicking about speed and faster everything.

I have an FDM printer for work and would probably use a resin printer for fun, so it’s nice to see the progress and increased ease of use. 👍